{"product_id":"duotone-frontpiece-al-3bs-2027","title":"Duotone Frontpiece AL 3BS","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eDuotone Frontpiece AL 3BS\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eDuotone Frontpiece AL 3BS\u003c\/strong\u003e is one of the most useful additions to the Duotone foil system, opening up combinations that were previously difficult or unavailable. Its purpose is simple: it allows compatible \u003cstrong\u003eDuotone SLS and Original front wings to be combined with D\/LAB tails and Monobloc tails\u003c\/strong\u003e, bringing the reduced drag, efficiency and direct response of Duotone's premium tail platform to a much wider range of foil setups.\u003c\/p\u003e\n\u003cp\u003eThis is particularly valuable if you ride larger SLS front wings and want to improve glide, pumping efficiency or overall response without changing your complete foil. Larger wings such as the \u003ca href=\"\/products\/duotone-front-wing-glide-3-0-sls-2027\"\u003eDuotone Glide 3.0 SLS\u003c\/a\u003e 1250 and 1400, as well as the Amp 2.0 SLS 1550 and 1800, can now be paired with the latest D\/LAB tail options through this 23 cm aluminium frontpiece.\u003c\/p\u003e\n\u003cp\u003eRather than forcing riders into one complete construction platform, the Frontpiece AL 3BS makes the Duotone foil system considerably more modular. If you already own the right SLS or Original front wing, it can provide a very effective performance upgrade path without replacing components that are still perfectly suited to the way you ride.\u003c\/p\u003e\n\u003ch2\u003eWhy choose the Duotone Frontpiece AL 3BS?\u003c\/h2\u003e\n\u003cp\u003eThe biggest reason to choose this frontpiece is \u003cstrong\u003ecompatibility\u003c\/strong\u003e. Duotone's D\/LAB Monobloc tails offer extremely clean, low-drag connections and highly optimised tail geometries, but until now the advantages of these tails have been more closely tied to the D\/LAB foil platform.\u003c\/p\u003e\n\u003cp\u003eThe Frontpiece AL 3BS bridges that gap. It lets riders retain a compatible SLS or Original front wing while moving to a D\/LAB tail, creating a hybrid setup that combines the strength and practicality required by larger front wings with the performance advantages of Duotone's latest tail designs.\u003c\/p\u003e\n\u003cp\u003eFor riders who spend time pumping, freeflying, downwinding, parawinging or simply trying to carry more speed and glide between manoeuvres, reducing tail drag can make a meaningful difference. The foil maintains momentum more readily, transitions between bumps or sections more efficiently and can feel cleaner through changes in speed.\u003c\/p\u003e\n\u003ch2\u003e23 cm aluminium construction\u003c\/h2\u003e\n\u003cp\u003eThe Frontpiece AL 3BS measures \u003cstrong\u003e23 cm\u003c\/strong\u003e and uses a high-grade aluminium construction. The choice of aluminium is important here. Larger front wings create increased span and torsional loads, so the priority is a stiff, strong and dependable connection rather than simply pursuing the lowest possible component weight.\u003c\/p\u003e\n\u003cp\u003eThe result is a frontpiece designed to remain solid under load while still giving riders access to premium D\/LAB tail performance. It is particularly relevant to larger foil combinations where a complete carbon D\/LAB fuselage solution may not be appropriate.\u003c\/p\u003e\n\u003ch2\u003eModular 60–70 cm fuselage configurations\u003c\/h2\u003e\n\u003cp\u003eThe 23 cm Frontpiece AL 3BS combines with different D\/LAB tail lengths to create overall fuselage lengths of approximately \u003cstrong\u003e60 to 70 cm\u003c\/strong\u003e. This means the tail itself does more than determine stabiliser characteristics; it can also influence the overall geometry and handling of the foil.\u003c\/p\u003e\n\u003cp\u003eA shorter overall setup generally favours a more responsive and reactive feel, while additional length can provide a calmer and more tracking-orientated ride. The ability to select different D\/LAB tails therefore gives experienced riders another useful way to tune the foil towards their preferred discipline.\u003c\/p\u003e\n\u003ch2\u003eChoosing a D\/LAB Monobloc tail\u003c\/h2\u003e\n\u003cp\u003eFor riders prioritising pump, glide and efficiency, the \u003ca href=\"\/products\/duotone-monobloc-tail-h-d-lab-2027\"\u003eDuotone Monobloc Tail H D\/LAB\u003c\/a\u003e is one of the most interesting combinations with the Frontpiece AL 3BS. Its high-aspect design is intended for efficient pumping, downwind riding, parawinging and freefly wing foiling.\u003c\/p\u003e\n\u003cp\u003eThe H 130 uses a 43 cm tail section and produces an overall fuselage length of approximately \u003cstrong\u003e66 cm\u003c\/strong\u003e, while the H 150 uses a 40 cm tail section for an approximately \u003cstrong\u003e63 cm\u003c\/strong\u003e fuselage. This allows the tail size and fuselage geometry to be matched more closely to front-wing size and riding style.\u003c\/p\u003e\n\u003cp\u003eFor riders focused on explosive freestyle performance, the \u003ca href=\"\/products\/duotone-monobloc-tail-f-d-lab-2027\"\u003eDuotone Monobloc Tail F D\/LAB\u003c\/a\u003e takes a different approach. Its compact 37 cm tail creates an approximately \u003cstrong\u003e60 cm fuselage\u003c\/strong\u003e and is designed around responsiveness, power, pop and controlled aerial manoeuvres.\u003c\/p\u003e\n\u003ch2\u003eAn important upgrade for larger Glide 3.0 SLS setups\u003c\/h2\u003e\n\u003cp\u003eThe Frontpiece AL 3BS becomes particularly relevant with larger \u003ca href=\"\/products\/duotone-front-wing-glide-3-0-sls-2027\"\u003eGlide 3.0 SLS\u003c\/a\u003e front wings. The 1250 and 1400 sizes generate the span and loads that make a strong aluminium connection particularly useful, while these are also exactly the sort of efficient front wings that can benefit from being paired with a low-drag Monobloc tail.\u003c\/p\u003e\n\u003cp\u003eFor a rider already using a Glide 3.0 SLS, the Frontpiece can therefore make more sense than replacing the complete foil simply to access a different tail platform. It creates a logical upgrade route: retain the front wing characteristics you already like and tune the rear of the foil for greater glide, efficiency or responsiveness.\u003c\/p\u003e\n\u003ch2\u003eWho is the Frontpiece AL 3BS for?\u003c\/h2\u003e\n\u003cp\u003eWe would primarily recommend the Frontpiece AL 3BS to riders who already have, or are building around, a compatible Duotone SLS or Original front wing and specifically want access to the D\/LAB tail and Monobloc tail system.\u003c\/p\u003e\n\u003cp\u003eIt makes particular sense for experienced riders who understand what they want to change about their existing foil. If your aim is better pump and glide, a different turning character, lower tail drag or a more discipline-specific setup, this component gives you considerably more freedom to tune the system.\u003c\/p\u003e\n\u003cp\u003eIf you are simply continuing to use your existing conventional SLS or Original foil configuration and have no intention of moving to a D\/LAB or Monobloc tail, you may not need the Frontpiece. Likewise, if you are building a complete foil around a D\/LAB front wing, the appropriate dedicated D\/LAB fuselage system will normally be the more logical route.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrontpiece length:\u003c\/strong\u003e 23 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e High-grade aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Duotone 3BS system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-wing compatibility:\u003c\/strong\u003e Compatible SLS and Original Duotone front wings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTail compatibility:\u003c\/strong\u003e D\/LAB tails and compatible D\/LAB Monobloc tails\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall fuselage length:\u003c\/strong\u003e Approximately 60–70 cm depending on the tail selected\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParticularly useful with:\u003c\/strong\u003e Glide 3.0 SLS 1250 \/ 1400 and Amp 2.0 SLS 1550 \/ 1800\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuotone item number:\u003c\/strong\u003e 42270-3853\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN:\u003c\/strong\u003e 9010583308319\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompatibility within modern foil systems can depend on the exact generation of front wing, mast and tail you are using. If you are upgrading an existing Duotone setup and are unsure whether all of your components will work together, contact The SUP Company with the exact models and sizes you currently own and we can help check the complete combination before you order.\u003c\/p\u003e\n\u003ch2\u003ePackage includes\u003c\/h2\u003e\n\u003cp\u003e1 x Duotone Frontpiece AL 3BS – 23 cm.\u003c\/p\u003e\n\u003cp\u003eFront wing, mast, D\/LAB tail, Monobloc tail and other foil components are not included unless specifically stated as part of a package.\u003c\/p\u003e\n\u003ch2\u003eBuild your 2027 Duotone foil setup\u003c\/h2\u003e\n\u003cp\u003eIf you are planning a new foil rather than upgrading one individual component, it is worth looking at the system as a whole. Front-wing size, tail choice and fuselage length all influence take-off, speed, pumping efficiency, pitch stability and turning response.\u003c\/p\u003e\n\u003cp\u003eFor more context on how the latest wings, foils, boards and connection systems fit together, read our \u003ca href=\"\/blogs\/buying-guides\/duotone-wing-foil-2027-range-guide-what-is-new\"\u003eDuotone Wing Foil 2027 Range Guide\u003c\/a\u003e. If your priority is maximum glide, also compare the \u003ca href=\"\/products\/duotone-front-wing-glide-3-0-sls-2027\"\u003eGlide 3.0 SLS\u003c\/a\u003e with the \u003ca href=\"\/products\/duotone-monobloc-tail-h-d-lab-2027\"\u003eMonobloc Tail H D\/LAB\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eDuotone Frontpiece AL 3BS FAQs\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat does the Duotone Frontpiece AL 3BS actually do?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eIt allows compatible Duotone SLS and Original front wings to be combined with D\/LAB tails and Monobloc tails. Its main purpose is to open the D\/LAB tail platform to a wider range of foil setups.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDo I need a D\/LAB front wing to use it?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eNo. In fact, one of the principal reasons for the Frontpiece AL 3BS is to allow compatible SLS and Original front wings to work with D\/LAB tail components.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow long is the Frontpiece AL 3BS?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe aluminium frontpiece itself is 23 cm long. When combined with a compatible D\/LAB tail, the complete fuselage length is approximately 60–70 cm depending on the tail selected.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eCan I use a Monobloc Tail H D\/LAB with a Glide 3.0 SLS?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes, the Frontpiece AL 3BS is designed to make combinations such as larger Glide 3.0 SLS front wings with D\/LAB Monobloc tails possible. This is one of its strongest use cases for riders looking for improved pump and glide efficiency.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhich Monobloc tail should I choose?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe Monobloc Tail H D\/LAB is the more natural choice for pump, glide, downwind, parawing and freefly performance. The Monobloc Tail F D\/LAB is a much more freestyle-focused option, prioritising pop, power and responsiveness.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eIs the Frontpiece AL 3BS a complete fuselage?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eNo. This product is the 23 cm frontpiece that forms part of a modular foil assembly. A compatible front wing, mast and D\/LAB tail or Monobloc tail are required to complete the setup.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWill it fit an older Duotone or Fanatic foil?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eDo not assume compatibility purely because the foil is from Duotone or Fanatic. The Frontpiece AL 3BS is designed around the current compatible SLS\/Original front-wing and D\/LAB tail systems. If you have an older foil, contact us with the exact model and year so the connection can be checked before purchase.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003c\/div\u003e","brand":"Duotone Wing Foiling","offers":[{"title":"C99:random \/ 23","offer_id":54647377854797,"sku":"9010583308319","price":169.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/8381\/8829\/files\/DTF_42270-3853_Frontpiece_AL_3BS_-_SIDE_2.png?v=1788438484","url":"https:\/\/www.thesupco.com\/products\/duotone-frontpiece-al-3bs-2027","provider":"The SUP Company","version":"1.0","type":"link"}