AXIS Power Carbon FATTY Integrated E-Foil Mast 800mm

The AXIS Power Carbon FATTY Integrated E-Foil Mast 800 is designed for riders who want a stiffer, more controlled powered-foil setup without an exposed power cable running down the mast. The 800mm carbon FATTY platform handles the extra loading of motor-assisted foiling, with a lower motor position and a direct connection to AXIS FATTY fuselages. A protective cover is included.

Why choose the Power Carbon FATTY Integrated Mast?

• Built for powered-foil loads: the FATTY platform is designed to cope with the additional leverage from the motor, battery and heavier or wider-span foil setups, helping keep the board-to-foil feel direct.
• Strong resistance to bending and twisting: high lateral and torsional stiffness helps the foil feel more predictable through turns, acceleration and changes in load.
• Lower motor position: AXIS positions the motor low on the mast for consistent thrust and power delivery during assisted take-offs and riding.
• Internal power cable: keeps the outside of the mast clear of a long exposed cable, reducing clutter and potential water drag compared with a retrofit arrangement.
• FATTY-system connection: made for AXIS FATTY fuselages, including the Advance+ FATTY range; it is not a universal replacement for standard AXIS mast fittings.

Who is it for?

For Foil Drive riders upgrading to an integrated carbon mast who value stiffness and connection, particularly when using larger wings or heavier powered-foil setups. It also makes sense for riders building a fresh AXIS FATTY foil system around a powered assist. If you already have a standard Black or Red fuselage and do not intend to change it, check the connection carefully before ordering: this mast requires a FATTY fuselage.

Features that matter on the water

Stiffness where powered foiling needs it

Putting motor thrust low on a foil mast changes how forces reach the board and fuselage. AXIS uses the stronger FATTY platform to resist both sideways flex and twisting, giving more consistent feedback when accelerating, carving or using broad-span wings.

Integrated power routing

With the power cable routed through the mast rather than strapped along its outside, the system has a cleaner outline. It also reduces the external cable management associated with retrofitting an assist motor to a conventional mast. The motor and Foil Drive electronics are separate components.

800mm mast height

At 800mm (approximately 31.5in), this is a versatile height for powered foiling with enough mast length for freeride and surf-oriented use. Actual handling and ventilation depend on the foil, board, motor arrangement and riding conditions.

Specifications

• Brand: AXIS
• Model: Power Carbon FATTY Integrated E-Foil Mast 800
• Range introduction: Autumn 2026
• Mast length: 800mm / approximately 31.5in
• Construction: Power Carbon FATTY integrated mast construction
• Power cable: internally routed and supplied
• Motor position: low-position integrated motor mounting arrangement
• Fuselage compatibility: AXIS FATTY fuselages only
• Protective cover: included in this The SUP Company package

What's included?

• 1 × AXIS Power Carbon FATTY Integrated E-Foil Mast 800mm
• 1 × integrated power cable (supplied with the mast)
• 1 × protective mast cover

Not included: Foil Drive control unit, motor, battery, controller, fuselage, front wing, rear stabiliser, board or mounting screws. Confirm the motor/system generation and the exact fixing hardware for your setup before ordering.

Compatibility and setup

Important: this is a FATTY-fuselage-only mast. It does not connect directly to standard AXIS Black or Red fuselages. The compatible AXIS Advance+ FATTY Black Fuselages are sold separately. This is also different from the AXIS High Modulus / Ultra High Modulus integrated mast range, which uses a different mast/fuselage architecture. Check Foil Drive component generation and connection requirements before purchase; do not assume all motors or cables interchange.

Buying advice

The key decision is whether you need the FATTY connection and its additional resistance to flex under powered loads. If you use large wings or are building a dedicated powered AXIS setup, this is worth considering. If your existing foil is built around a conventional Black fuselage, changing the mast alone is not sufficient. Contact our team with your current mast, fuselage and Foil Drive generation so we can check the complete configuration.

Frequently asked questions

Does the mast include the motor and Foil Drive unit?

No. It comes with its integrated power cable and a protective cover, but the motor, battery and Foil Drive control unit are sold separately.

Can I fit this mast to my standard AXIS Black fuselage?

No. The integrated FATTY mast requires a compatible AXIS FATTY fuselage. Standard Black fuselages have a different mast connection.

Is this the same as the AXIS High Modulus integrated Foil Drive mast?

No. The Power Carbon FATTY is a separate 2026 integrated mast developed around FATTY-system stiffness and fuselage compatibility. Do not choose between them on mast length alone.

Does the mast come with a cover?

Yes. This The SUP Company package includes a protective cover.